Mitsubishi Electric IQSS-R-E Reference Manual page 269

[Initialization]
(0) Initialize the execution result.
Initialize the normal completion display.
Initialize the abnormal completion display.
Set the backup execution trigger.
[Requesting backup right to use]
(9) Store the right-to-use number.
Set a right-to-use request.
Set the backup right-to-use confirmation trigger.
[Checking backup right to use]
(22) Set the backup setting/start trigger.
Display the right-to-use acquisition failure.
[Setting/Starting data backup]
(36) Set the target module/execution unit.
Set the target folder number.
Set the target module.
Set the target device 1.
Set the target device 2.
Set the data backup operation setting (on error).
Set the backup request.
[Checking data backup execution]
(51) Display the normal completion.
Save the number of normally completed devices.
(56) Display the abnormal completion.
Save the number of devices completed with an error.
Save the error cause in a module.
Save the backup error cause in a device.
[Enabling the next data backup process]
(65) Clear the initialization trigger.
Clear the backup execution trigger.
Clear the backup right-to-use request trigger.
Clear the backup right-to-use confirmation trigger.
Clear the backup setting/start trigger.
[Setting for cancelling the process]
(75) Set the backup cancellation request.
[Releasing backup right to use]
(80) Set the backup right-to-use release trigger.
[Updating backup right to use]
(89) Set the backup right-to-use request.
9.4 Backing up/Restoring Data of Devices Supporting iQSS
9 CC-Link IE Field Network
9
267