3.6
Using CIO-MICRO I/O module
An IP address needs to be set to use a CIO-MICRO I/O module.
This section shows the procedure to set an IP address to a CIO-MICRO I/O module.
For the vision sensors that can be connected to a CIO-MICRO I/O module, refer to the user's manuals of
vision sensors.
1.
Set inputs and outputs (I/O connection).
Ò
Ó
Ô
Õ
Click the [Inputs/Outputs] button.
Click the [I/O Module] button.
Set items as follows.
• Select I/O Module: CIO-Micro
• Connect To: cioMicro_xxxxxx
Select the [Change Settings]
button.
3 I/O CONNECTION
3.6 Using CIO-MICRO I/O module
3
85