Probe Control Dialog Box - Waters GCT Premier Operator's Manual

Probe Control dialog box

In the Control tab of the Probe Control dialog box, you manually run probe
ramp methods. The tab also visually represents ramping method as it runs.
Probe Control dialog box Control tab:
Probe Control dialog box Control tab:
Parameter
Ramps Display
Probe State
Time
Value
BP/TIC
7-16 The Direct Insertion Probe
Description
Shows a graph of the active probe ramp against time.
Both the target value and the actual value are shown
to indicate how accurately the ramp profile is being
followed.
Displays the active state of the probe ramp.
Displays the time, in minutes.
Displays the active ramp value, in units appropriate
to the probe type. For example, °C for DI probe and A
for DCI probe.
Displays the Base Peak or TIC intensity, as
appropriate.
.