High Voltage Hazard; Safety Symbols - Waters GCT Premier Operator's Manual

High voltage hazard

Warning:
the external covers are damaged.

Safety symbols

Warnings in this guide or on the instrument must be observed during all
phases of service, repair, installation, and operation of the instrument.
Waters Corporation assumes no liability for the failure of those who install,
repair, or operate its instruments to comply with these requirements.
Safety symbols appear in this guide and on the instrument. They accompany
warning and caution statements. A Warning statement draws your attention
to the risk of injury or death; a Caution statement draws attention to the risk
of damaging the instrument.
Warning:
hazard. See the operator's guide for instructions.
Warning:
Warning:
Warning:
Warning:
Warning:
Warning:
health threat.
Warning:
Warning:
Caution:
instrument, or affecting its operation.
To avoid electric shock, shut down the instrument if any of
General warning indicating a potential health or safety
Hazardous voltages.
Hot surfaces.
Corrosive substances.
Toxic substances.
Flammable substances.
Biological agents present that may constitute a serious
Laser radiation.
UV radiation.
Care must be taken to avoid the possibility of damaging the
v