Modifying An Existing Function In The List; Copying An Existing Function In The List; Deleting A Function From The List - Waters GCT Premier Operator's Manual

Modifying an existing function in the list

To modify an existing function in the list:
1. In the Function List, select the function.
2. Click
Alternative:
3. In the TOF MS Scan Editor, make the required changes to the
parameters.
4. Click OK.
Result:

Copying an existing function in the list

To copy an existing function in the list:
1. In the function list, select the function.
2. Click Edit > Copy.
3. Click Edit > Paste.
Result:
4. Modify the parameters as required.
See also:

Deleting a function from the list

To delete a function from the list:
1. In the function list, select the function.
2. Click
Alternative:
.
Double-click the function.
MassLynx updates the function list display your changes.
A copy of the function appears in the function list.
Modifying an existing function in the list on page
.
Click Edit > Delete, or press the Del key.
4-7.
Setting up an MS Method 4-7