Figure 41 License Key; Figure 42 Drive Configuration - Qualstar Q48 Installation And Operation Manual

Q24/Q48 Tape Library
This page allows the user to add additional functionality to the unit by entering license key
3.2.7.3 Changing the License Key configuration
information. Please contact your supplier to see if this functionality is applicable in your system.
This page shows the current configuration of all tape drives in the library and allows modification to
3.2.7.4 Changing the Drive configuration
the configuration. The user is also able to select the <Power On> check box through this page to
activate the drive.
This page shows the current network configuration of the library related to the RMU access and allows
3.2.7.5 Changing the Network configuration
modification to the configuration. When a change is requested, a pop-up window will ask you to
confirm the changes.
CAUTION
© Copyright QUALSTAR 2015
Figure 42 License key
Figure 43 Drive configuration
 Changes in this menu may affect the ability to access the RMU
interface unless the correct IP address is resolved.
Installation and Operations Manual
47