Table of Contents
Advertisement
Chapter 11
| Interface Commands
Interface Configuration
show interfaces
switchport
MAC Learning Status
Console#
This command displays the administrative and operational status of the specified
interfaces.
Syntax
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 1.
Console#show interfaces switchport ethernet 1/1
Information of Eth 1/1
Broadcast Threshold
Multicast Threshold
Unknown Unicast Threshold
LACP Status
Ingress Rate Limit
Egress Rate Limit
VLAN Membership Mode
Ingress Rule
Acceptable Frame Type
Native VLAN
Priority for Untagged Traffic : 0
GVRP Status
Allowed VLAN
Forbidden VLAN
802.1Q Tunnel Status
802.1Q Tunnel Mode
802.1Q Tunnel TPID
Broadcast Block
Unknown Multicast Block
Unknown Unicast Block
Console#
: Enabled
: Enabled, 500 packets/second
: Disabled
: Disabled
: Disabled
: Disabled, 1000000 kbits/second
: Disabled, 1000000 kbits/second
: Hybrid
: Disabled
: All frames
: 1
: Disabled
:
1(u)
:
: Disabled
: Normal
: 8100 (Hex)
: Disabled
: Disabled
: Disabled
– 408 –
Hide quick links:
Advertisement
Table of Contents
