Table 15: Fan Control Commands; Show Watchdog - Edge-Core ECS4120-28F Reference Manual

show watchdog

watchdog software
Fan Control
This command shows if watchdog debugging is enabled.
Command Mode
Privileged Exec
Example
Console#show watchdog
Software Watchdog Information
Status : Enabled
Console#
This command monitors key processes, and automatically reboots the system if any
of these processes are not responding correctly.
Syntax
watchdog software {disable | enable}
Default Setting
Disabled
Command Mode
Privileged Exec
Example
Console#watchdog
Console#
This section describes the command used to force fan speed.

Table 15: Fan Control Commands

Command
fan-speed force-full
show system
Chapter 4
Function
Forces fans to full speed
Shows if full fan speed is enabled
– 117 –
| System Management Commands
Fan Control
Mode
GC
NE, PE