4.8
Configuring RADIUS Settings
The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
'Configuration Parameters Reference' on page 643.
To configure RADIUS:
1.
Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
2.
Configure the parameters as required.
3.
Click Submit to apply your changes.
4.
To save the changes to flash memory, see 'Saving Configuration' on page 530.
User's Manual
Figure 4 -32: RADIUS Parameters Page
66
Mediant 800B GW & E-SBC
Document #: LTRT-10274