Configuring Radius Settings - AudioCodes MP-11x User Manual

3. To delete authorized IP addresses, select the Delete Row check boxes corresponding
to the IP addresses that you want to delete, and then click Delete Selected
Addresses; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
4. To save the changes to flash memory, see 'Saving Configuration' on page 366.
Notes:
•
The first authorized IP address in the list must be your PC's (terminal) IP address;
otherwise, access from your PC is denied.
•
Delete your PC's IP address last from the 'Web & Telnet Access List page. If it is
deleted before the last, subsequent access to the device from your PC is denied.
4.8

Configuring RADIUS Settings

The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
'Configuration Parameters Reference' on page 475.

To configure RADIUS:
1. Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 366.
User's Manual
Figure 4-35: RADIUS Parameters Page
76
MP-11x & MP-124
Document #: LTRT-65432