Configuring Radius Settings - AudioCodes Mediant 2000 User Manual
Voip media gateway sip protocol
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
3.7
Configuring RADIUS Settings
The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
''Configuration Parameters Reference'' on page 409.
To configure RADIUS:
1.
Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
2.
Configure the parameters as required.
3.
Click Submit to apply your changes.
4.
To save the changes to flash memory, see ''Saving Configuration'' on page 350.
SIP User's Manual
Figure 3-38: RADIUS Parameters Page
62
Mediant 2000
Document #: LTRT-68814
Advertisement
Table of Contents
Troubleshooting
