CHAPTER 16 Services
If you are using the device's local LDAP cache, see
Cache
Configuring AD-Based Routing Rules
The following procedure describes how to configure outbound IP routing based on LDAP queries.
➢
To configure LDAP-based IP routing for Skype for Business:
1.
Configure the LDAP server parameters, as described in
2.
Configure the AD attribute names used in the LDAP query:
a.
Open the SIP Definitions General Settings page (Setup menu > Signaling & Media tab >
SIP Definitions folder > SIP Definitions General Settings).
for the LDAP query process.
Mediant 800 Gateway & E-SBC | User's Manual
Configuring the Device's LDAP
Configuring LDAP
- 248 -
Servers.