Mounting
3.2 Mounting the motor
3.2.1
Mounting orientation and dimensions
Mounting orientation
SIMOTICS S-1FL6 supports flange mounting only and three types of constructions, so it can
be installed in three orientations as shown in the following figure.
Note
When configuring the IM V3 type of construction, pay particular attention to the permissible
axial force (weight force of the drive elements) and the necessary degree of protection.
SIMOTICS S-1FL6 Low inertia servo motors (unit: mm)
Shaft height 20 mm
Rated power
0.05 kW
0.1 kW
60
Rated torque
a
0.16 Nm
38.5
0.32 Nm
38.5
L
86
106
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002
L1
119
139