Siemens SIMOTICS S-1FL6 Operating Instructions Manual page 292

Appendix
A.3 Motor selection
Speed
Maximum speed: It refers to the motor's maximum speed in operation, which is generally
lower than the rated speed. When a motor operating at the maximum speed, pay attention to
its torque and temperature rise.
Inertia and inertia ratio
Inertia refers to the force required to keep a certain physical state. Inertia ratio indicates
dynamic response performance of motors. The smaller the inertia ratio is the better response
performance a motor has.
Typical load inertia equations
Mechanism
Axis of rotation on center
Axis of rotation off center
Conveyor
Object hung with pulley
292
Equation
W: Mass (kg)
a: Length (m)
b: Width (m)
W: Mass (kg)
a: Length (m)
b: Width (m)
R: Rotational diameter (m)
W: Mass (kg)
D: Pulley wheel diameter (m) Ball screw
W: Mass (kg)
D: Pulley wheel diameter (m)
J : Pulley inertia (kg·m )
2
p
Mechanism
Axis of rotation on center
Axis of rotation off center
Reducer
Operating Instructions, 09/2016, A5E37208830-002
Equation
W: Mass (kg)
D : External diameter (m)
1
D : Internal diameter (m)
2
W: Mass (kg)
D: Workpiece diameter (m)
R: Rotational diameter (m)
W: Mass (kg)
P: Lead (m)
J : Ball screw inertia (kg·m
b
W: Mass (kg)
n /n : Speed of each motor
1 2
(rpm)
J /J : Inertia of each motor
1 2
(kg·m )
2
SINAMICS V90, SIMOTICS S-1FL6
)
2