Siemens SIMOTICS S-1FL6 Operating Instructions Manual page 255

● Alarms
To acknowledge faults, proceed as follows:
Note
• If you do not eliminate the cause(s) of the fault, it can appear again after no button
operation for five seconds. Make sure that you have eliminated the cause(s) of the fault.
• You can acknowledge faults using RESET signal. For details of the signal, refer to DIs
(Page 81).
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002
Diagnostics
255