Mounting The Motor; Mounting Orientation And Dimensions - Siemens SINAMICS V90 Operating Instructions Manual

Mounting

3.2 Mounting the motor

3.2 Mounting the motor
NOTICE
Damage to the encoder
For mounting conditions, see Technical data - servo motors (Page 51).
3.2.1

Mounting orientation and dimensions

Mounting orientation
SIMOTICS S-1FL6 supports flange mounting only and three types of constructions, so it can
be installed in three orientations as shown in the following figure.
Note
When configuring the IM V3 type of construction, pay particular attention to the permissible
axial force (weight force of the drive elements) and the necessary degree of protection.
68
Do not exert any shock at the shaft end; otherwise, the encoder may be damaged.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002