Auxiliary Functions - Siemens SIMOTICS S-1FL6 Operating Instructions Manual

Basic operator panel (BOP)

6.5 Auxiliary functions

Note
Invalid parameter number
If the input parameter number is unavailable, the nearest parameter number to the input
value is displayed.
6.5 Auxiliary functions
In total, there are six BOP functions available:
①
Jog
②
Save parameter set in drive
③
Restore parameter values to default
④
Copy parameter set from a drive to a mi-
cro SD card/SD card
122
⑤
Copy parameter set from a micro SD
card/SD card to a drive
⑥
Update firmware
⑦
Adjust absolute encoder
NOTE:
This function is available only when the
servo motor with an absolute encoder is
connected.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002