Preface - Siemens SIMOTICS S-1FL6 Operating Instructions Manual

Preface

Documentation components
Document
Operating Instructions
Getting Started
SIMOTICS S-1FL6 Servo Motors Installation Guide
SINAMICS V90 Servo Drives Information Guide
SINAMICS V90 V-ASSISTANT Online Help
Target group
This manual provides information about the SINAMICS V90 PN servo system for planners,
operators, mechanical engineers, electrical engineers, commissioning engineers, and
service engineers.
Technical support
Country
China
Germany
Italy
India
Turkey
Further service contact information:
Support contacts (https://support.industry.siemens.com/cs/ww/en/)
Product maintenance
The components are subject to continuous further development within the scope of product
maintenance (improvements to robustness, discontinuations of components, etc).
These further developments are "spare parts-compatible" and do not change the article
number.
In the scope of such spare parts-compatible further developments, connector positions are
sometimes changed slightly. This does not cause any problems with proper use of the
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002
Content
(this manual)
Describes how to install, connect, operate, and perform
basic commissioning of the SINAMICS V90 PN servo sys-
tem.
Describes how to install the SMOTICS S-1FL6 servo motor
and relevant safety notices.
Describes how to find all the SINAMICS V90 documents
from the website and relevant safety notices.
Describes how to perform fast commissioning and diagnos-
tics for the SINAMICS V90 drives via the SINAMICS V-
ASSISTANT engineering tool.
Hotline
+86 400 810 4288
+49 911 895 7222
+39 (02) 24362000
+91 22 2760 0150
+90 (216) 4440747
3