Siemens SIMOTICS S-1FL6 Operating Instructions Manual page 257

Fault list
Fault
F1000: Internal software error
Message class: Hardware /
software error (1)
Reaction: OFF2
Acknowledgement: POWER
ON
F1001: FloatingPoint excep-
tion
Message class: Hardware /
software error (1)
Reaction: OFF2
Acknowledgement: POWER
ON
F1002: Internal software error
Message class: Hardware /
software error (1)
Reaction: OFF2
Acknowledgement:
IMMEDIATELY
F1003: Acknowledgement
delay when accessing the
memory
Message class: Hardware /
software error (1)
Reaction: OFF2
Acknowledgement:
IMMEDIATELY
F1015: Internal software error
Message class: Hardware /
software error (1)
Reaction: OFF2
Acknowledgement: POWER
ON
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002
Cause
An internal software error has occurred.
An exception occurred during an operation
with the FloatingPoint data type.
An internal software error has occurred.
A memory area was accessed that does
not return a "READY".
An internal software error has occurred.
12.2 List of faults and alarms
Remedy
Evaluate fault buffer.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to later version.
•
Contact the Hotline.
•
Replace the Control Unit.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on).
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Diagnostics
257