Siemens SIMOTICS S-1FL6 Operating Instructions Manual page 230

Parameters
11.2 Parameter list
Par. No. Name
p2586 EPOS jog 2 setpoint
velocity
Description: Sets the setpoint speed for jog 2.
Dependency: Refer to: p2588
p2587 EPOS jog 1 traversing
distance
Description: Sets the traversing distance for incremental jog 1.
Dependency: Refer to: p2585
p2588 EPOS jog 2 traversing
distance
Description: Sets the traversing distance for incremental jog 2.
Dependency: Refer to: p2586
p2599 EPOS reference point
coordinate value
Description: Sets the position value for the reference point coordinate. This value is set as the actual axis
position after referencing or adjustment.
Dependency: Refer to: p2525
p2600 EPOS search for refer-
ence point offset
Description: Sets the reference point offset for search for reference.
p2604 EPOS search for refer-
ence start direction
Description: Sets the signal sources for the start direction of the search for reference.
1 signal: Start in the negative direction.
•
0 signal: Start in the positive direction.
•
Dependency: Refer to p2583
p2605 EPOS search for refer-
ence approach velocity
reference cam
Description: Sets the approach velocity to the reference cam for the search for reference.
Dependency: The search for reference only starts with the approach velocity to the reference cam when there
is a reference cam.
Refer to: p2604, p2606
Note: When traversing to the reference cam, the velocity override is effective. If, at the start of the search for
reference, the axis is already at the reference cam, then the axis immediately starts to traverse to the zero
mark.
p2606 EPOS search for refer-
ence reference cam max-
imum distance
Description: Sets the maximum distance after the start of the search for reference when traversing to the
reference cam.
Dependency: Refer to: p2604, p2605, and F07458
230
Min Max
-40000000 40000000
0 214748264
7
0 214748264
7
-2147482648 214748264
7
-2147482648 214748264
7
- -
1 40000000
0 214748264
7
Factory Unit Data
Setting type
300 100 I32
0 L
U/mi
n
1000 LU U32
1000 LU U32
0 LU I32
0 LU I32
0 - U32/Bina
ry
5000 100 U32
0 L
U/mi
n
214748 LU U32
2647
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E37208830-002
Effective Can be
changed
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T
IM T, U
IM T, U