Technical Data; Technical Data - Servo Drives - Siemens SIMOTICS S-1FL6 Operating Instructions Manual

General information

2.6 Technical data

Function
External braking resistor - DCP, R1
(Page 93)
Digital inputs/outputs (DIs/Dos)
(Page 81)
PROFINET communication
(Page 159)
SINAMICS V-ASSISTANT
2.6 Technical data
2.6.1

Technical data - servo drives

General technical data
Parameter
24 VDC Voltage (V)
power
Maximum current (A)
supply
Overload capability
Control system
Dynamic brake
Protective functions
Speed Speed control range
control
Analog speed command input
mode
Torque limit
Environ- Surrounding air
mental temperature
conditions
38
An external braking resistor can be used when the internal
braking resistor is insufficient for regenerative energy
Control signals and status signals can be assigned to four
programmable digital inputs and two digital outputs
Supports communication between the SINAMICS V90 PN
servo drive and PLC with PROFINET communication proto-
col
You can perform parameter settings, test operation, ad-
justment and other operations with a PC
Description
24 (-15% to +20%)
1.5 A (when using a motor without a brake)
3.5 A (when using a motor with a brake)
300%
Servo control
Built-in
Earthing fault protection, output short-circuit protection
age/undervoltage protection
protection
4)
Analog speed command 1:2000, internal speed command 1:5000
-10 VDC to +10 VDC/rated speed
Set through a parameter or the analog input command (0 VDC to +10
VDC/max. torque)
Opera- 0 °C to 45 °C: without power derating
tion
45 °C to 55 °C: with power derating
Description
1)
, I t inverter,I
3) 2 2
Operating Instructions, 09/2016, A5E37208830-002
Control mode
EPOS, S
EPOS, S
EPOS, S
EPOS, S
, overvolt-
2)
t motor, IGBT overtemperature
SINAMICS V90, SIMOTICS S-1FL6