Table of Contents
Advertisement
3.4
Technical data
3.4.1
General technical data
Unless specified otherwise, the following technical data is valid for all the following
components of the air-cooled SINAMICS S120 drive system.
Table 3- 10
General technical data
Electrical data
Line supply voltage
Line frequency
Output voltage
Output frequency
Electronic power supply
Maximum short-circuit current I
cording to IEC, in conjunction with the
specified fuses or circuit breakers for
devices in the Chassis format
Frequency with which the DC link is
precharged
Overvoltage category
Electromagnetic compatibility (EMC)
Emitted interference
•
Standard
•
With line filter
Noise immunity
Mechanical data
Vibratory load
•
Transport
2)
•
Operation
Shock stressing
•
Transport
2)
•
Operation
Air-Cooled Chassis Power Units - supplement to Motor Module 6SL3320-1TG41-5AA3
Equipment Manual, 10/2020, A5E50422764A
3 AC 500 V -10% (-15% < 1 min) ... 3 AC 690 V +10%
47 ... 63 Hz
0 to line connection voltage, depending on the type of infeed.
With an Active Line Module, it is also possible to achieve a higher output voltage.
Vector control: 0 ... 550 Hz
Servo control: 0 ... 550 Hz
U/f control: 0 ... 550 Hz
24 VDC (20.4 V ... 28.8 V)
implemented as PELV circuit according to EN 61800-5-1
Ground = Negative polarity grounded via the electronics
ac-
•
1.1 ... 447 kW: 65 kA
CC
•
448 ... 671 kW: 84 kA
•
672 ... 1193 kW: 170 kA
•
>1194 kW: 200 kA
Max. 1 precharge every 3 minutes
Class III according to EN 61800-5-1
•
Category C3 (second environment) according to EN 61800-3
•
Category C2 (first
When used in the first environment, an appropriately trained and authorized
*)
technical person must set up the drive and commission it.
NOTE: An appropriately trained and authorized technician is person or organiza-
tion with the required experience for setting up and/or for commissioning the
drive systems, including the associated EMC aspects.
Use in the first and second environment according to EN 61800-3
•
EN 60721-3-2:1997, Class 2M2
•
Test values according to EN 60068-2-6 test Fc:
–
10 ... 58 Hz: Constant deflection = 0.075 mm
–
58 ... 150 Hz: Constant acceleration = 9.81 m/s² (1 g)
•
EN 60721-3-2:1997, Class 2M2
•
Test values according to EN 60068-2-27 test Ea: 98 m/s² (10 g) / 20 ms
Motor Module Chassis 6SL3320-1TG41-5AA3
1)
1)
1)
and second environments) according to EN 61800-3
*)
3.4 Technical data
33
Advertisement
Table of Contents
