6.5
Auxiliary functions
In total, there are 9 BOP functions available:
①
Jog
②
Save parameter set in drive
③
Restore parameter values to default
④
Copy parameter set from drive to an SD
card
⑤
Copy parameter set from an SD card to
drive
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Basic operator panel (BOP)
⑥
Update firmware
⑦
Adjust AI1 offset
⑧
Adjust AI2 offset
⑨
Adjust absolute encoder
NOTE:
This function is available only when the
servo motor with an absolute encoder is
connected.
6.5 Auxiliary functions
127