Auxiliary Functions; Jog - Siemens SINAMICS V90 Operating Instructions Manual

6.5

Auxiliary functions

Totally, there are nine BOP functions available:
①

Jog

②
Save parameter set in drive
③
Restore parameter values to default
④
Copy parameter set from drive to a micro
SD card/SD card
⑤
Copy parameter set from a micro SD
card/SD card to drive
6.5.1 JOG
Note
The digital signal EMGS must be kept at high level (1) to ensure normal operation.
With the Jog function, you can run the connected motor and view Jog speed or Jog torque.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Basic operator panel (BOP)
⑥
Update firmware
⑦
Adjust AI1 offset
⑧
Adjust AI2 offset
⑨
Adjust absolute encoder
NOTE:
This function is available only when the
servo motor with an absolute encoder is
connected.
6.5 Auxiliary functions
151