Safety Summary; Safety Terms And Symbols In This Manual - Tektronix MSO70000/C Series User Manual

Safety Summary

To avoid potential hazards, use this probe only as specified.
Connect and Disconnect Properly.
the probe to the circuit under test. Disconnect the probe input and the probe ground from the circuit under test before
disconnecting the probe from the measurement instrument.
Observe All Terminal Ratings.
the product manual for further ratings information before making connections to the product.
Do not Operate Without Covers.
Avoid Exposed Circuitry.
Do Not Operate With Suspected Failures.
qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Keep Product Surfaces Clean and Dry.

Safety Terms and Symbols in This Manual.

These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in damage to this product or other property.
Symbols on the Product.
MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DPO5000 Series User Manual
Connect the probe output to the measurement instrument before connecting
To avoid fire or shock hazard, observe all ratings and markings on the product. Consult
Do not touch exposed connections and components when power is present.
Do not touch exposed connections and components when power is present.
If you suspect there is damage to this product, have it inspected by
Do Not Operate in an Explosive Atmosphere.
This symbol may appear on the product:
Appendix
183