Tektronix MSO70000/C Series User Manual page 179

Run Application Software
Use SVP, SVM, and SVE to validate wideband designs and characterize wideband spectral events.
Use SVO for flexible OFDM analysis, requires SVE.
Use SVT for settling time measurements (frequency and phase), requires SVE.
Use USB to characterize USB 2.0 signals including mask testing and parametric testing.
Use USB3 to verify, characterize, debug, and compliance test USB 3.0 systems.
Use UWB Ultra-Wideband Spectral Analysis to make quick work of WiMedia analysis.
Use USB-TX and USB3 to verify, characterize, debug, and compliance test USB 3.0 systems.
Use UWB and UWBE Ultra-Wideband Spectral Analysis to make quick work of WiMedia analysis.
Use VNM CAN/LIN Protocol Analysis Software for CAN and LIN testing (CAN triggering not included).
Use XGBT for 10 GBASE-T Ethernet physical medium attachment (PMA) physical-layer (PHY) electrical compliance
testing.
Follow the instructions provided with the
application software to install it. To run the
software, select Analyze and then select the
application.
158 MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DPO5000 Series User Manual