Tektronix MSO70000/C Series User Manual page 129

Display a Waveform
3. Set up your search from the Configure
tab. To copy the trigger setup or a search
setup, press Settings Copy.
4. From the Copy Settings window, select
where to copy the settings from and
where to copy the settings to. Press
Copy and then Close.
5. To modify the current search setup,
adjust the displayed controls. Displayed
controls vary depending on the selected
search.
6. If not already on, press Search to toggle
search to on.
108 MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DPO5000 Series User Manual