Example For Configuring Selective Qinq With Vlan Mapping - Huawei Quidway S7700 Configuration Manual - Ethernet

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
<SwitchB> display current-configuration interface gigabitethernet 1/0/2
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
If Switch A and Switch B are configured correctly:
l PCs can communicate with each other through the carrier network.
l IPTV terminals can communicate with each other through the carrier network.
----End
Configuration Files
Only the configuration files of the Switches are provided:
l
#
sysname SwitchA
#
vlan batch 2 to 3
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
port vlan-stacking vlan 100 to 200 stack-vlan 2
port vlan-stacking vlan 300 to 400 stack-vlan 3
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
l
#
sysname SwitchB
#
vlan batch 2 to 3
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
port vlan-stacking vlan 100 to 200 stack-vlan 2
port vlan-stacking vlan 300 to 400 stack-vlan 3
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
5.12.3 Example for Configuring Selective QinQ with VLAN
Mapping
Networking Requirements
As shown in
through home gateways.
The corridor switches allocate VLANs to the services as follows:
Issue 01 (2011-07-15)
Configuration file of Switch A
Configuration file of Switch B
Figure 5-3, the Internet access, IPTV, and VoIP services are provided for users
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 QinQ Configuration
221