WAGO-I/O-SYSTEM 750
750-484 2AI 4-20mA HART Ex i
8
Operating Modes
The HART I/O module can be used with various operating modes depending on
connection and parameterization.
Table 37: Overview of Operating Modes
Operating Mode
2 AI + 6 bytes mailbox
(Default)
2 AI + 1 HART variable
per Channel
2 AI + 2 HART variables
per Channel
2 AI + 3 HART variables
per Channel
2 AI + 4 HART variables
per Channel
2 AI + acyclic PROFIBUS
services
*)
see table „Compatibily List"
Table 38: Designation of Operating Modes in WAGO-I/O-CHECK
Up to Version 3.17.1.17
2 AI + acyclic PROFIBUS services
2 AI + 1 HART variable per channel
2 AI + 2 HART variables per channel
2 AI + 3 HART variables per channel
2 AI + 4 HART variables per channel
2 AI + 6-Byte Mailbox *
Table 39: Designation of Operating Modes in PROFIBUS GSD (Standard Module 750-484)
Operating Mode "2 AI + ..."
acyclic PROFIBUS services
acyclic PROFIBUS services and access
to the register structure
1 HART variable per channel
2 HART variables per channel
3 HART variables per channel
4 HART variables per channel
6-Byte Mailbox
on Fieldbus Coupler/-
Controller
all compatible Fieldbus
couplers/-controllers
*)
75x-xxx
PROFIBUS DP/V1
Fieldbus coupler
750-333 or Fieldbus
controller 750-833
Version 3.17.1.18 or higher
2AI+opt. DVP1 (HART tool routing via
PROFIBUS DP-V1)
2[AI+1HV] (1 HART value per channel)
2[AI+2HV] (2 HART value per channel)
2[AI+3HV] (3 HART value per channel)
2[AI+4HV] (4 HART value per channel)
2AI+Mailbox (HART communication via
function blocks)
PROFIBUS GSD
750-484 2AI+opt. DPV1
750-484 2AI+opt. DPV1 RA
750-484 2[AI+1HV]
750-484 2[AI+2HV]
750-484 2[AI+3HV]
750-484 2[AI+4HV]
750-484 2AI+Mailbox
Operating Modes
Use
1) with
„WagoLibHART_0x.lib"
PLC library
2) with HART dynamic
variables
3) with PROFIBUS/HART
Gateway 759-360
Manual
Version 1.4.0
53