Seats - Factory Five Racing MK4 ROADSTER Assembly Manual

Bolt the ground strap to the hole and then run the other end to a boss on the block. In this case we used
an engine mount bolt.

Seats


" drill bit, drill,
/
5
16

Seat mount hardware, seats
Unpack the seats and set them in the cockpit.
Sit in the seats and locate them in the position you are most comfortable. This is a critical fitment so
take your time and make sure you are happy with the location.
" hex key, ½" deep socket, marker
/
3
16
www.factoryfive.com
313
508-291-3443