Transmission Harness - Factory Five Racing MK4 ROADSTER Assembly Manual

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Transmission Harness

Push the harness plugs through the hole in the driver's side floor aluminum.

Run the harness forward into the corner to the ¾" tube at the foot box front. Then go up and along the

angled ¾" tube to its connector. Make sure that it does not get in the way of the accelerator pedal. Use

the drilled holes and the zip tie trick to keep the harness in the corner along the floor.

www.factoryfive.com

508-291-3443