Run the harness over the pedal box and steering shaft and through the large slot in the firewall. The
connectors for the rest of the harness easily fit through this hole and the big rubber grommet on the
harness press fits into the laser cut hole.
Attach the rectangular plug to the other harness.
The remainder of the dash harness can be run on top of the 2"x 2" square tube over to the computer side.
Run everything loosely so that final positioning can be done.
Connect the relays and snap connectors to their original spots along with all sensors and relays.
228
www.factoryfive.com
508-291-3443