Factory Five Racing MK4 ROADSTER Assembly Manual page 212

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Lay out the various lengths of brake line so you can see what you have to work with. Like the fuel lines,

there are many ways to run these lines but you must be very careful to keep them protected from moving

parts, heat, or being to close to the bottom of the car.

Which side you run down may depend on where you are hooking up to your fuel rail, carburetor,

or pressure regulator. We usually run the fuel lines on the passenger side of the car and the brake

lines on the driver side of the car.

The laser cut brackets (shown are brackets for stainless lines from the front brake assembly) attach to the

chassis right behind the front upper control arms. Drill and rivet these in place using two

www.factoryfive.com

508-291-3443