Under Door Aluminum - Factory Five Racing MK4 ROADSTER Assembly Manual

Under door Aluminum


" drill bit, rivet tool, silicone, caulking gun, spray glue, tin snips.
Drill, 1 /
8

Packaged aluminum, interior trim/carpet, secondary body fasteners
Unpack the under door aluminum panels. They are shaped to fit around the bottom of the door with
flanges to mount to the chassis.
Silicone and rivet the panels in place, it is ok if the flanges do not cover the full width of the chassis
tubes. It is more important that the panel is lined up with the body under the door.
484
www.factoryfive.com 508-291-3443