Turn Signal And Ignition Switches - Factory Five Racing MK4 ROADSTER Assembly Manual

87-93 Mustang gauges mounted in gauge pod.
Remove the two gauge wiring connectors from the gauge cluster by squeezing the outside clips.
Remove the clear plastic gauge cover with a Torx screwdriver and discard. Place the switches and
gauge pod in your parts area, awaiting kit assembly.

Turn Signal and Ignition Switches


Socket set, extension, Phillips head screwdrivers, needle nose pliers, T-15 Torx screwdriver

Turn signal and ignition switches
87-93 Steering column (with ignition, turn signal stalk)
38
www.factoryfive.com 508-291-3443