Factory Five Racing MK4 ROADSTER Assembly Manual page 183

94-04 - Put a dot of thread lock on the threads of the steering rack extension and attach the new inner tie
rods to the steering rack.
Push the boot back onto the steering rack body and attach with zip ties.
The track of the FFR Roadster front end is a little narrower than the Mustang. Screw in the tie rod ends
until the inner tie rod is flush with the end of the threaded section on the driver side, ¾" past the end on
passenger's side.
Attach the tie rod to the spindle, torque the castle nut to 25 ft-lbs and install the cotter pin from the kit.
182
www.factoryfive.com 508-291-3443