Mark the hole locations for the oil filter relocator on the old AC bracket or on the front frame X member
(preferred location). If you're going to mount the relocate bracket on the X member.
Drill the mounting holes for the relocator.
Make sure to drill this before you install your engine. Otherwise, your drill won't fit in between
the engine and the frame.
96-04 A/C Eliminator Kit
18mm socket, 18mm combination wrench.
Alternate drive pulley components, A/C Eliminator Kit
Place a washer onto the bolt.
Place the pulley wheel on the bolt.
256
www.factoryfive.com
508-291-3443