Power Steering Oil Cooler (If Applicable); 1996-1999 Version - Factory Five Racing MK4 ROADSTER Assembly Manual

Power Steering Oil Cooler (If applicable)


" drill bit, ⅜" wrench.
Drill, 3 /
16

Power steering cooler and hoses.

1996-1999 Version

Mount the power steering cooler to the
mount on the passenger side and the hole drilled in the preparation section earlier on the other side.
If using the tubular lower control arms, drill two
picture below. If using the stock Mustang control arms, lower the driver side mount so that the outlets
are routed under the ¾" front body mount tube.
" plate on the front of the 4" main rails. Use the original
3 /
16
" holes in the
3 /
16
274
www.factoryfive.com 508-291-3443
" plate at the locations shown in the
3 /
16