96-04 Additional Steps - Factory Five Racing MK4 ROADSTER Assembly Manual

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Mount the radiator top to the flange with the hardware provided. The bottom stays zip tied for now.

96-04 additional steps

Hold the upper radiator mount plate up to the frame, and line up the bend with the bend in the ¾" tube.

Mark rivet locations every 3"- 4".

Drill and rivet the mount plate to the tube using ⅛" rivets.

Mark the location of the radiator edge on the plate and mark rivet hole locations every 3"- 4" on the

plate that will go through the top flange and mount plate.

www.factoryfive.com

508-291-3443