Side Exhaust; Seats Harness - Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual

Side Exhaust


", " Hex key, ⅜", ½",
3 5
/ /
16 16

Side Exhaust
Bolt the mounting bracket to the pipe on the forward side of the bracket.
Bolt the pipe and gasket to the header or J-pipe with using the shorter ⅜" bolts and mechanical locknuts.
" hole in the 1.50" x 1.50" outrigger tube directly above the middle hole in the mounting bracket. Get
3
Drill a /
16
this hole as high as you can get it while still being able to mount the rubber exhaust hanger, about ½" down
from the aluminum floor.

Seats Harness


¾" wrench, ¾" socket, ½" drill bit, drill, ratchet

Seat Harness/Fasteners
Unpack the seat harnesses and hardware.
" socket, ratchet,
9 9
/ /
16 16
317
www.factoryfive.com
" wrench, drill, ",
3 5
/ /
16
508-291-3443
" drill bits
16