Using Your Mobile Device When You Enable Wifi Standby; Configuring A Display Name - Nortel MCC3100 User Manual

Basic setup and use
Timer to 3 minutes. For more information about the MCC 3100 for
Windows Mobile firewall settings, see
To avoid being disturbed by incoming calls while your mobile device
is switched off, turn the ringer off. For more information, see
the call alert mode and phone volume" on page
Using your mobile device when you enable
WiFi Standby
To conserve power on your mobile device, turn it off (press the Power
button or allow the activity timer to expire). You can receive calls and
messages while the mobile device is off.
But if you enable the Turn Off if Unregistered option and the mobile
device is outside the WiFi range longer than the timeout period you
specify, you cannot receive calls and messages.
While your mobile device is off, the following actions occurs:
• The backlight is off.
• The device power state is standby.
• The wireless Local Area Network (LAN) power save mode is Best
Battery.
To resume normal operation, turn on your mobile device (press the Power
button or receive a call or message).
While your mobile device is on, the following actions occurs:
• The backlight is on.
• The device power state is on.
• The wireless LAN power save mode is Best Performance.

Configuring a display name

You configure a display name, which other users see instead of your SIP
address when you are in a WiFi communication session. You can also
program your display name on the Home screen. See
name (WiFi SIP only)" on page
38
"Manual setup" on page
50.
97.
"Setting
41.
"Adding a display