Chapter 4 System Screens
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware Upgrade screen.
Figure 33 Error Message
4.5 The Configuration Tools Screen
Use this screen to perform various administrative tasks such as backing up the ES-305's
configuration and resetting the it to its factory default settings.
Click System > Configuration Tools. The following screen displays.
Figure 34 Configuration Tools
The following table describes the labels in this screen.
Table 6 Configuration Tools
LABEL
Restart System
Restore Factory Defaults Select this to return the ES-305 to its factory default settings. Its IP address
50
DESCRIPTION
Select this to turn the ES-305 off, then on. The settings on the ES-305
remain unchanged.
will be 192.168.0.1 and the administrator username and password will be
set.
ES-305 User's Guide