Drive Bay Numbering - HPE ProLiant ML110 Gen11 User Manual

Item Item LED LED
1 Fault/Locate
2 Online/Activity

Drive bay numbering

Drive bay numbering
CAUTION: CAUTION:
When a server is purchased without any drive installed, some drive bays might be empty while other drive bays might be
populated with drive blanks. To maintain proper system cooling, do not operate the server without a drive or a drive blank
installed.
Subtopics Subtopics
LFF non-hot-plug drive bay numbering LFF non-hot-plug drive bay numbering
LFF hot-plug drive bay numbering LFF hot-plug drive bay numbering
SFF hot-plug drive bay numbering SFF hot-plug drive bay numbering
Mixed hot-plug drive bay numbering Mixed hot-plug drive bay numbering
LFF non-hot-plug drive bay numbering LFF non-hot-plug drive bay numbering
This server supports up to 8 SATA drives in two LFF non-hot-drive boxes.
Tower orientation Tower orientation
State State Definition Definition
Solid amber
Solid blue
Flashing amber/blue (1
flash per second)
Flashing amber (1 flash per
second)
Off
Solid green
Flashing green (1 flash per
second)
Flashing green (4 flashes
per second)
Off
This drive has failed, is unsupported, or is invalid.
The drive is operating normally and being identified by a
management application.
The drive has failed, or a predictive failure alert has been received
for this drive. The drive has also been identified by a management
application.
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
The drive is operating normally and not being identified by a
management application.
The drive is online and has no activity.
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
The drive is operating normally and has activity.
The drive is not configured by a RAID controller or is a spare drive.
HPE ProLiant ML110 Gen11 Server User Guide 27