LED Indicators
The following tables describe what the LEDs on the recorder indicate.
Power Status Indicators
The power button on the front of the recorder lights up when power is on.
Additional information about the power supply is provided by the power status indicator on the back of the
recorder. The following table describes what the LEDs indicate:
Figure 1:
(1) The power status indicator.
LED Indicator
Off
Green
Flashing green
Flashing green then turns off
Flashing orange
Network Link Status Indicators
When the recorder is connected to the network, the recorder's connection status LEDs above the Ethernet
port display the recorder's connection status to the network. The following table describes what the LEDs
indicate:
LED Indicators
Description
Power is not connected.
Power is supplied to the recorder.
Firmware update is being applied to the power supply unit.
The redundant power supply is mismatched. This only occurs if
you have a secondary redundant power supply installed.
There is a problem with the power supply.
7