Figure 2-2 Cpe Status Screen - Motorola CPEo 400 Series Manual

WiMAX CPEo400 Series User Guide
Procedure 2-4 WiMAX Security (Continued)
2
A WiMAX Status Screen will appear. This screen will provide any status associated with your
WiMAX Wireless Broadband connection. See the example Status Screen below.

Figure 2-2 CPE Status Screen

68P09285A67-D
The Authentication
Method is EAP-TLS .
The Authentication
Method is
EAP-TTLS/MS-CHAPv2
Congratulations! You have now completed the setup of your WiMAX
connection.
NOTE
You can confirm a successful WiMAX connection by seeing a green
check mark on the globe symbol at the top of your User Screen.
Click OK on the Congratulations! dialog box.
1.
Enter the Realm information as provided by
your service provider
2. Click the Apply button
1.
Enter the User Nameand Password as
supplied by your service provider.
2.
Enter the Realminformation as provided by
your service provider.
3. Click the Finish button when finished
Wizard Step Three — WiMAX Security
2-7
MAR 2008