Subaru IMPREZA 2002 Service Manual page 306

3281 OAA071
3281 OAAI 01
-
Standard
3
Become distant from
3rd gear by 0.2 mm
(0.008 in).
32804AA070
32804AA080
-
Standard
3
Become distant from
2nd gear by 0.2 mm
(0.008 in).
SHIFTER FORK AND ROD
MANUAL TRANSMISSION AND DIFFERENTIAL
C: INSPECTION
1) Check the shift shaft and shift rod for damage.
Replace if damaged.
2) Gearshift mechanism
Repair or replace the gearshift mechanism if ex-
cessively worn, bent, or defective in any way.
3) Inspect the clearance between lst, 2nd driven
gear and reverse driven gear. If any clearance is
not within specifications, replace the shifter fork as
required.
Clearance (a) and (b):
9.5 mm (0.374 in)
4) Inspect the clearance between 3rd, 4th drive
gear and coupling sleeve. If any clearance is not
within specifications, replace shifter fork as re-
quired.
Clearance (a) and (b):
9.3 mm (0.366 in)
B3M1411A
(A) 3rd drive gear
(B) Coupling sleeve
(C) 4th drive gear
L I
I
3rd-4th shifter fork
I
Part
No.
I
Mark
I
Remarks
(A) 1st driven gear
(B) Reverse driven gear
(C) 2nd driven gear
Approach to 4th gear
by 0.2 mm (0.008 in).
I
32810AA061
I
I
Approach to 1st gear
by
0.2 mm (0.008 in).
I
32804AA060
I
1
I
MT-82