Subaru IMPREZA 2002 Service Manual page 88

ATF COOLER PIPE AND HOSE
I
AUTOMATIC TRANSMISSION
I
2. TURBO MODEL
1) Set the vehicle on the lift.
2) Remove the battery and washer tank.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the radiator under cover.
EN1063
sconnect the ATF cooler hose from radiator
NOTE:
: -
Do
not remove with a screwdriver or other point-
ed tools.
When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
I -
TR0329
7)
Disconnect the ATF cooler hoses from pipes.
NOTE:
Do not remove with a screwdriver or other point-
ed tools.
When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
8) Remove the ATF cooler pipe from frame.
I '
TR0331
9) Remove the oil cooler inlet and outlet pipes.
CAUTION:
When removing the outlet pipe, be careful not
to lose the ball and spring used with retaining
screw.
(A) Inlet pipe
(B) Outlet pipe
AT-48