MANUAL TRANSMISSION ASSEMBLY
I
MANUAL TRANSMISSION AND DIFFERENTIAL
16) Install the stabilizer link from the transverse
link.
Except sedan turbo model
Tightening torque:
30 N.m (3.1 kgf-m, 22.1 ft-lb)
Sedan turbo model
Tightening torque:
45 N-m (4.6 kgf-m, 33.2 ft-lb)
17) Install the gear shift rod and stay.
(1) Connect the rod to the joint.
Tightening torque:
18 N-m (1.8 kgf-m, 13.0 ft-lb)
(2) Connect the stay to the transmission brack-
et.
18 N.m (1.8 kgf-m, 13.0 ft-lb)
Tigh fening torque:
(A) Stay
(B) Transmission bracket
18) Install the propeller shaft. <Ref. to DS-15, IN-
STALLATION, P rope1 le r Shaft. >
19) Install the heat shield cover. (If equipped)
20) Install the rear exhaust pipe and muffler.
21) Install the hanger bracket on the right side of
transmission.
(4,
B2M0032
Install the front exhaust pipe and center ex-
. .
haust pipe. (Non-turbo model)
<Ref. to EX(S0HC)-6, INSTALLATION, Front Ex-
haust Pipe.>
23) Install the center exhaust pipe. (Turbo model)
<Ref. to EX(D0HC TURBO)-9, INSTALLATION,
Center Exhaust Pipe.>
24) install the under cover.
MT-32