Subaru IMPREZA 2002 Service Manual page 60

AUTOMATIC TRANSMISSION ASSEMBLY
AUTOMATIC TRANSMISSION
I
Turbo model
ST 499977300 CRANK PULLEY WRENCH
Non-turbo model
ST 499977100 CRANK PULLEY WRENCH
15) Remove the ATF level gauge.
CAUTION:
Plug the opening to prevent entry of foreign
particles into transmission fluid.
16) Set the ST.
NOTE:
Also is available Part No. 41 099AA010.
ST 41 099AA020 ENGINE SUPPORT ASSY
17) Remove the bolt which holds right upper side of
transmission to engine.
B3M2044
18) Lift-up the vehicle.
19) Remove the under cover.
20) Remove the heat shield cover. (If equipped)
21) Drain the ATF to remove the ATF drain plug.
(A) Oil pan
(6) Drain plug
22) Disconnect the ATF cooler hoses from pipes of
transmission side, and remove the ATF level gauge
guide.
23) Remove the propeller shaft.
<Ref. to DS-14, REMOVAL, Propeller Shaft.>
24) Remove the shift select cable. <Ref. to CS-26,
REMOVAL, Select Cable.>
25) Disconnect the stabilizer link from transverse
link.
AT-20