Subaru IMPREZA 2002 Service Manual page 114

SUBARU SELECT MONITOR
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
I
6. Subaru Select Monitor
A: OPERATION
(DTC)
1. READ DIAGNOSTIC TROUBLE CODE
1) Prepare the Subaru Select Monitor kit.
(2) Connect the diagnosis cable to data link
connector.
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor and OBD-ll general scan tool.
5) Turn the ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
I
S2M0285
2) Connect the diagnosis cable to Subaru Select
Monitor.
3
Insert the cartridge into Subaru Select Monitor.
<Ref. to AT-6, PREPARATION TOOL, General De-
scription.>
1
S2M028E
4) Connect the Subaru Select Monitor to dati
connector.
link
(1) Data link connector located in the lower por-
tion of the instrument panel (on the driver's
side).
(A) Data link connector
.
' '
S2M0288C
(A)
Power switch
6) On the ((Main Menu,) display screen, select the
{Each System Check} and press the [YES] key.
7) On the ((System Selection Menu,, display
screen, select the {Transmission Control System}
and press the [YES] key.
8) Press the [YES] key after displayed the informa-
tion of transmission type.
9) On the ((Transmission Diagnosis)) display
screen, select the {Diagnostic Code@) Display}
and press the [YES] key.
10) On the ((Diagnostic Code(s) Display)) display
screen, select the {Latest Diagnostic Code(s)} or
{Memorized Diagnostic Code(s)} and press the
[YES] key.
NOTE:
For detailed operation procedure, refer to the
UAL.
For detailed concerning diagnostic trouble
codes, refer to the DIAGNOSTIC TROUBLE CODE
LIST (DTC). <Ref. to AT-29, List of Diagnostic
Trouble Code (DTC).>
2. READ CURRENT DATA
1) On the ((Main Menu,) display screen, select the
{Each System Check} and press the [YES] key.
2) On the ((System Selection Menu)) display
screen, select the {Transmission Control System}
and press the [YES] key.
3) Press the [YES] key after displayed the informa-
tion of transmission type.
4) On the ((Transmission Diagnosis,, display
screen, select the {Current Data Display & Save}
and press the [YES] key.
SUBARU SELECT MONITOR OPERATION MAN-
AT-22